Mega2560 Pro ATmega2560-16AU USB CH340G

（详情提供中英文描述）

中文描述：

嵌入版Mega 2560 CH340G / ATmega2560 - 兼容 Mega 2560主板。基于Atmel ATmega2560微控制器和USB-UART接口芯片CH340G构建。

电路板尺寸紧凑，尺寸为38x55mm。这是一个很好的解决方案，使您的终项目在焊接原型板上。

主板功能类似于Arduno Mega 2560.它是嵌入式主板，但同样稳定，并采用原装芯片ATmega2560（16 MHz）。

该板使用芯片CH340G作为转换器UART-USB。当您在频率12Mhz工作时，提供稳定的数据交换结果（需要安装驱动程序到计算机）。

Mega PRO（嵌入式）2560 CH340G / ATmega2560 - 通过microUSB电缆连接到计算机（几乎适用于所有Android智能手机）。

您可以通过MicroUSB连接器为电路板供电或为插针供电。电压调节器（LDO）可以处理6V至9V（峰值18V）DC的输入电压。输出电流为5V - 约800mA，3.3V - 约800mA（请注意，输入电压越高，输出电流越低）。这将为您的大部分初始项目提供可靠的动力。

英文描述：

product description:

Embedded version Mega 2560 CH340G / ATmega2560 - Compatible with Mega 2560 motherboard. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G.

The board is compact and measures 38x55mm. This is a great solution to get your final project on the welding prototype board.

The motherboard functions like the Arduno Mega 2560. It is an embedded motherboard, but it is also stable and uses the original chip ATmega2560 (16 MHz).

The board uses the chip CH340G as the converter UART-USB. Provides a stable data exchange result when you work at a frequency of 12Mhz (requires driver to be installed to the computer).

Mega PRO (embedded) 2560 CH340G / ATmega2560 - Connect to a computer via a microUSB cable (almost for all Android smartphones).

You can power the board or power the pins through the MicroUSB connector. The voltage regulator (LDO) can handle input voltages from 6V to 9V (peak 18V) DC. The output current is 5V - about 800mA, 3.3V - about 800mA (note that the higher the input voltage, the lower the output current). This will provide reliable power for most of your initial projects.

图片展示：