Feature of product
2.4G working frequency, strong versatility, transmission distance up to 10 meters Using the original high-end mainstream chip 3065-XY, the power consumption is lower, the cursor is more stable,Stronger ability to pass 800-1200-1600 three-level hardware CP switching function, press the CP button of the mouse to be free Switch favorite speed Use infrared LED as mobile tracking light source Multi-level power saving mode, maximum battery energy saving Nano receiver, plug and play

The product does not have a battery configuration

Advanced product features
1. CPI adjustment function
The mouse has three levels of CP adjustment from 800 to 1200 to 1600. The power-on default is 1200 If you want to switch to other speeds, press and hold the left and right buttons at the same time, you can switch between these three speeds.Switch between, until you like the speed so far.

2. Automatic sleep and complete shutdown function If you do not use the mouse for 8 minutes, the mouse will enter the auto-sleeping shutdown state.

It saves power. You just need to press any key to restart the computer. If you turn off Brain, or unplug the receiver, just press a button or move the mouse at will, you can also enter The shutdown state of hibernation.

3. Receiver collection function
This mouse uses an ultra-mini (Nan) receiver, which can be placed on the USB port of a PC or Notebook for a long time without any impact on the computer. If you want to go out or store with your mouse alone, you can put the receiver inside the mouse for easy storage and easy carrying out to avoid omissions

4. Reconnect
The wireless mouse transmitting and receiving are automatically locked with the identification code, which is convenient for multiple groups of mice to use One to one use. In the case of high temperature, high magnetic field or when the receiver is dialed out, the mouse is powered off The automatic code will disappear, you need to reconnect before you can use it

1. Plug the receiver back in
2. Move the mouse 50M away from the receiver and reinstall the battery and press any key to connect successfully
3. The code is successfully matched, and you can use the wireless mouse again

Note: Please take out the battery when you do not use the mouse for a long time to avoid corrosion of the parts。

产品特点2.4G工作频率，通用性强，传输距离可达10米 采用原装高端主流芯片3065-XY，功耗更低，光标更稳定,通过能力更强 800-1200-1600三级硬件CP切换功能，按下鼠标的CP键即可自由切换喜欢的速度 使用红外LED作为移动追踪光源 多级节电模式，最大限度节约电池能耗 纳米接收器，即插即用

该产品没有配置电池

先进的产品功能1、CPI调节功能鼠标有三档CP调节，从800到1200到1600。开机默认为1200 如果你想切换到其他速度，同时按住左右键，就可以在这三种速度之间切换.切换，直到你喜欢的速度为止。

2. 自动睡眠和完全关机功能 如果你在8分钟内不使用鼠标，鼠标将进入自动睡眠关机状态。
它可以节省电力。你只需按下任何一个键就可以重新启动电脑。如果你关闭大脑，或拔掉接收器，只需按下一个按钮或随意移动鼠标，你也可以进入休眠的关机状态。

3. 接收器收集功能本鼠标采用超迷你（Nan）接收器，可以长期放置在电脑或笔记本的USB接口上，对电脑没有任何影响。如果你想单独带着鼠标外出或存放，可以将接收器放在鼠标内，方便存放，方便携带，避免遗漏

5. 重新连接无线鼠标的发射和接收都是用识别码自动锁定的，方便多组鼠标使用 一对一使用。在高温、高磁场或接收器拨出时，鼠标断电 自动代码会消失，需要重新连接才能使用
1. 将接收器重新插上2. 将鼠标移到离接收器50米远的地方，重新装上电池，按任意键连接成功。3. 代码匹配成功，您就可以再次使用无线鼠标了。

注意：当您长时间不使用鼠标时，请将电池取出，以避免部件被腐蚀。
通过www.DeepL.com/Translator（免费版）翻译